How to Make a Gazebo Cover?

Have a gazebo, but don’t know how to cover it up?

Stick with us and learn How to make a gazebo cover!

If you have an old gazebo cover then you require a new one in case the old one is worn out. But if you are creative and like to do things by yourself, then making your own gazebo cover isn’t too hard, if you are aware of the proper materials and steps it requires. 

You can make your own homemade gazebo cover if you have your old cover and tracing it is the simplest way to sew a new one. If you don’t have the cover, you can measure it yourself and use materials like a canvas that fits and cover all corners. 

This time-consuming process makes sure that it gives shade and weather protection to the people. However, extreme exposure will cause the gazebo cover to fade and deteriorate, which will require a replacement sooner than expected. 

If you have basic sewing knowledge but you are unable to replicate the old cover, you can create your very own DIY gazebo cover according to your desire, patterns, and design.

You May also read: How to Decorate a Pop-Up Gazebo?

How to Make a Gazebo Cover? (7 Best Methods)

There are 7 best ways how to Make a Gazebo Cover:

1). Take measurements 

Measure the gazebo’s dimensions such as length, breadth, and height with the help of a tape measure. The eaves of a roof should be accounted for. If the cover is going over the roof, take its surface into consideration along with other features present in the gazebo frame.

Also, you also need to check the hemming process and you might need to add a few inches to the width and length. If you want to prevent fraying, then you will need a 1.5-inch hemline on each side and for that, you should have around 3 inches of the hem and fold it.

2). Mark the Fabric

Now, you have to draw an outline on the canvas or any fabric that you are using with the help of chalk. This will help you know where to cut it. You should compare the accurate measurements with the marker then take your shears and cut the fabric along your lines.

If you’re not sure, it’s best to follow the rule and select a larger cut than to risk trying to ruin the fabric by cutting it too short. A good tip is to figure out where the cables need to be attached that will be tied all around the side for maximum support. 

3). Place the Rough cut over your Gazebo

Put the rough cut over the gazebo with the help of any assistance and a step ladder. Remember you should not tie the cover rigidly because it can get uncomfortable when you try to take it off.   But, it should be a close fit so that it doesn’t flap in case of strong winds.

4). Sew the Cover

The next step is to stitch the hems after you pin the 1.5-inch hem in place before you begin stitching, either using a sewing machine or the traditional needle and thread.

Unless you’re very skilled with a needle, you should probably use a sewing machine. This will help you do more in less time. Use sturdy thread for extra protection that won’t deteriorate in rain or the cold. If you want your hem to last longer and not tear easily, double-stitch it to make it tight.

5). Check if the cover fits properly

It’s time to show what you’ve made once you’ve completed stitching. Put the cover on the gazebo with the aid of an extra set of hands so you can see how well it fits. This will let you know if there is any need for further adjustments, if yes, then you should alter the measurements where needed. 

6). Sew the Cords

Now, you have to tie the canvas cords to the sides, but they must be sewn.  This will prevent the cover from being blown away in case of harsh weather conditions. It needs to be sufficiently long so that it can be wrapped over the sides up to the ceiling for added strength and support.

7). Diy Gazebo Cover

It’s possible to save a lot of money by making your own new cover. There is a possibility that certain individuals already have the required tools and materials in their homes. Even if you don’t, the materials are not expensive, and you can get them from any hardware store.

Making the gazebo cover at home is not a difficult job, anyone who wishes to be creative and get the job done by themselves, and add a personal touch to the gazebo, then you should opt for diy gazebo cover.

What are the Tools and Requirements to Make a Gazebo Cover?

Before making your gazebo cover, make sure the fabric you choose is waterproof to avoid rain water seeping into your gazebo and ruining your setup. You should keep proper care and check but if you are having second thoughts, waterproof the cover using water sealant or a waterproofing method.  

To make a gazebo cover, you will require the follow the instructions, they can be as simple as making a square gazebo. But, in case of a different or more complicated shape, you will have to change the measurements and work accordingly.

If you have the old cover with you, save it as it can come in handy because it can be used to measure the size and shape of your gazebo. It can help take the exact measurements for the new one. But, for correct measurements, you will have to cut the stitching so it can lie flat.

The things you will need are as follows:

• A sizable canvas piece, vinyl, or acrylic
• Strong shears for added strength
• Tape measure
• Sewing pins
• Sewing machine
• Strong needle
• Heavy-duty waterproof thread
• Chalk
• A long piece of wood
• Materials for drawing straight lines
• Long canvas cords
• Step ladder

What are the Materials to Make a Gazebo Cover?

There are different materials that can be used as a new cover but before buying any, make sure to check the advantages and drawbacks to avoid any inconvenience in the future. The following materials can be found at any hardware store. 

1). Canvas

Canvas is attractive and durable as it doesn’t stretch, bend, or rip but due to its larger weight, it is more difficult to handle or maneuver than lighter materials. In addition, it makes maintenance harder and more problematic while cleaning.

2). Acrylic

Acrylic is long-lasting, low-maintenance material that comes in a wide range of colors. Acrylic’s surface is vulnerable to scratches or other abrasive degradation. This quality makes it look old after only a few years of use.

3). Vinyl

Vinyl is a great choice since it is resistant to the sun’s rays, has a long lifespan, and is quite tough. It is easy to maintain and doesn’t require a lot of attention. But it does come with a drawback, some people might not like the synthetic feel it gives. 

Construction of Gazebo Canopy

A gazebo canopy can be made to that of a gazebo cover. Depending on the length of the canopy, you may use the materials accordingly. Canopies can only extend to the midpoint or three-quarters of the way down the side of the structure.

But, in order to save more time, you can use the previous measurements and dimensions from your old canopy if you had one. 

You will need a stool and assistance with a ruler. Front and side measurements of the gazebo should be taken into account. Next, you must cut the desired material according to the required size and put it over the frame to ensure a proper fit. 

Once everything is done properly, you should go for double stitching that will ensure extra durability. Other than that, you can also stitch laces on the interior of the canopy to securely hold it to the tent poles.

FAQs (Frequently Asked Questions)

Conclusion

If you have an old gazebo cover, you will need a new one if the old one is worn. However, if you are creative and enjoy doing things yourself, constructing your own gazebo cover is not too difficult provided you are aware of the necessary supplies and methods.

If you don’t know How to make a gazebo cover, follow the instructions and methods.